A Top company - serving Waterford, NJ

Olympia Chimney Flue Liner Replacement Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Olympia Chimney Flue Liner Replacement: The Waterford Owner’s Guide

We stock and install Olympia Chimney-compatible flue liner replacement parts, and most Waterford jobs run between $1,900 and $3,400 installed, depending on liner length and whether we’re swapping just the liner or the connector components too. We carry the common sizes on the truck, so if your liner has failed and you need it matched, we can usually get you on the schedule within a few days, not weeks.

Call (856) 699-1992

Most Waterford homeowners find out their liner is shot the same way: a sweep flags it during an inspection, or they open the damper one autumn evening and notice rust flakes sitting in the firebox. Sometimes it’s the smell, that faint campfire odor that hangs in the house even when the fireplace hasn’t been used in months. That’s a liner telling you it’s done breathing properly. The camera doesn’t lie, either. When we run a scope down a failed Olympia Chimney liner in this part of Camden County, we typically see cracked seams, pitting from acidic condensation, or outright separation where the sections should be locked tight.

Key takeaways:

  • Olympia Chimney liners fail from condensation, not just fire heat, and NJ humidity accelerates it
  • We stock common Olympia Chimney replacement liner sizes and order exact specs same-week for oddball lengths
  • Installed pricing is flat and given before work starts, parts and labor together
  • Every replacement gets the 90-Day Done Right Promise in writing

Which Olympia Chimney Models This Applies To

Olympia Chimney makes a handful of stainless steel liner series, and the replacement path depends on which one you have. The most common in Waterford homes are the Olympia smooth-wall flexible liners and the rigid sectional liners, both of which show up in older fireplaces converted to gas or in wood-burning setups where the original clay tile gave out years ago.

Here’s the compatibility gotcha most people don’t know: Olympia Chimney liners are sized by inner diameter, and the outer diameter changes depending on whether you have single-wall or double-wall insulated liner. A 6-inch inner diameter Olympia flexible liner measures closer to 6.25 inches outer diameter without insulation wrap, but jumps past 7 inches once the insulation kit goes on. That matters in Waterford because plenty of the older colonials near Atco Road have chimneys with tight clay tile passages. If the old clay tiles are still partially intact, you may not have room for the insulated version without breaking out the remaining tile first. We measure before we order, because an eighth of an inch decides whether the liner drops in clean or fights you the whole way down.

As for OEM versus aftermarket: Olympia Chimney discontinued several liner part numbers over the years, which means OEM replacement sections aren’t always available even if you wanted them. In those cases, a quality UL-listed equivalent from DuraFlex or HeatShield often fits the same dimensions and does the same job. We install both OEM and solid aftermarket equivalents, and we’ll tell you plainly which one makes sense for your chimney. Top Hat Chimney is an independent local business, not affiliated with Olympia Chimney, so our only incentive is putting in the liner that actually fits your flue and holds up under South Jersey weather.

If you’re not sure which Olympia Chimney liner you have, check for a sticker or stamped label near the top of the liner where it exits the crown. Failing that, we measure the inner diameter with a set of calipers when we’re on the roof. Takes two minutes and removes all guesswork.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

  • Rust flakes in the firebox or on the smoke shelf. Stainless steel liners shouldn’t be throwing rust after a decade or two. When you see flakes, the liner is corroding from the inside out, usually because condensation has been eating at the metal during the humid stretches of a Waterford summer.
  • A persistent smoky or campfire smell when the fireplace is cold. Condensation and creosote soak into the liner walls and hold that odor. A failed liner lets those smells drift back into the living room instead of carrying them up and out.
  • Visible cracks, gaps, or separation at the liner seams. Older Olympia Chimney sections were locked together mechanically, and the joints were always the weak point. If you can see daylight or misalignment where sections meet, the liner is no longer a continuous protective channel.
  • Crumbling mortar or clay tile fragments showing up in the firebox. The liner sits inside the original clay tile flue in many Waterford chimneys. When the clay has cracked and the Olympia liner is too thin or damaged to compensate, bits of tile start falling through.
  • White staining or efflorescence on the exterior chimney brick. Moisture breaching the flue system shows up on the outside masonry. If your chimney has white chalky deposits appearing and disappearing with the weather, something inside has breached and water is moving where it shouldn’t be.

One note from years of pulling these things out: an Olympia liner that’s simply dirty will still show clean metal underneath once swept. A liner that’s failing will show deep pitting that doesn’t scrub off. We’ll always show you before we recommend replacement, because if it doesn’t need doing, we’ll tell you that too.

Replacement Cost & What’s Included

In Waterford, a full Olympia Chimney flue liner replacement typically runs $1,900 to $3,400 installed. At the lower end, you’re looking at a straightforward swap where the old liner comes out without a fight, the flue passage is clean, and the new liner drops in at a standard height. At the higher end, we’re breaking out remaining clay tile, adding an insulation wrap, or dealing with a taller chimney on a steep roof that requires extra rigging.

Scope of work Typical Waterford price range
Standard single-story liner swap, no tile removal $1,900-$2,400
Two-story chimney with easy roof access $2,300-$2,900
Tile breakout, insulation wrap, or steep roof access $2,800-$3,400

That price includes the liner itself, connectors, top plate, cap compatibility check, and labor from start to finish. We bring the camera and give you photo documentation of the new liner in place before we pack up. The number you hear on the phone is the number on the invoice. No trip charge inside our service county, and the 90-Day Done Right Promise covers the entire job in writing. Seniors and veterans always get 10% off, and any repair over $200 gets $40 off.

DIY or Call Us?

You can safely check a few things on your own: look for rust flakes in the firebox, shine a flashlight up the flue from inside with the damper open, and walk around the exterior looking for cracked crown mortar. Those checks help you decide whether it’s worth a call. But actually replacing a flue liner involves working on a roof, sometimes a steep one, and manhandling stainless steel sections down a chimney chase. It is not a weekend project. A liner that’s improperly installed or sized wrong creates a carbon monoxide path into the house, and the stakes there are real.

This is one part of the chimney we never recommend doing yourself. Wendell Pike and his crew have pulled and set more Olympia Chimney liners in Waterford than we can count, and the difference between a liner that lasts and one that fails early is usually how it was handled on the way in. Call (856) 699-1992 and we’ll come look at it properly.

FAQs

Need Chimney Cleaning help in Waterford? Licensed & insured · Written inspection reports response · free estimates
Call (856) 699-1992
Local Service Coverage

Request a Free Estimate in Waterford

Tell us what you need - Top Hat Chimney responds fast. No obligation.

By reaching out through this form, you agree to the terms of our Privacy Policy and consent to receive communications via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch